Permatex 5 Minute Gap Filling Epoxy - .6oz [84201]
for product information
2 Great reasons to buy from us:
5 Minute Gap Filling Epoxy - .6oz
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.
Applications:
- Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.
Directions:
- PROTECT: Work area must be protected from accidental spills.
- CLEAN: Surfaces must be clean, dry and free of grease and oil.
- PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
- OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
- DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
- CLEAN-UP: Attach nozzle caps and store in molded tray.
NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
5 Minute Gap Filling Epoxy - .6oz
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.
Applications:
- Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.
Directions:
- PROTECT: Work area must be protected from accidental spills.
- CLEAN: Surfaces must be clean, dry and free of grease and oil.
- PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
- OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
- DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
- CLEAN-UP: Attach nozzle caps and store in molded tray.
NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
Terms and Conditions.
|
||
contact us, All Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
||
Returns are easy, simply contact usAll Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Ordering products from Inflatable Boats Sales we may receive a commission from our affiliates. |
5 Minute Gap Filling Epoxy - .6oz
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.
Applications:
- Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.
Directions:
- PROTECT: Work area must be protected from accidental spills.
- CLEAN: Surfaces must be clean, dry and free of grease and oil.
- PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
- OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
- DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
- CLEAN-UP: Attach nozzle caps and store in molded tray.
NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
Terms and Conditions.
|
||
contact us, All Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
||
Returns are easy, simply contact usAll Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Ordering products from Inflatable Boats Sales we may receive a commission from our affiliates. |