Permatex Penetrating Grade Threadlocker GREEN Tube - 36ml [29040]
for product information
2 Great reasons to buy from us:
Penetrating Grade Threadlocker GREEN Tube - 36ml
OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2″ (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
Applications:
- Automobile - Suggested Applications: Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, and hairline cracks.
- Marine - Suggested Applications: Bolts on alternators, distributor clamps, carburetor adjustment screws, hairline or porosity cracks
Directions:
- Clean and dry parts using Permatex® Surface Prep™ activator.
- Assemble parts and make adjustments.
- Apply Threadlocker where thread enters parts. Refer to Technical Data Sheet for complete information.
NOTE: Threadlocker works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured Threadlocker by heating above 500°F (260°C); then use hand tools to separate components.
Penetrating Grade Threadlocker GREEN Tube - 36ml
OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2″ (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
Applications:
- Automobile - Suggested Applications: Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, and hairline cracks.
- Marine - Suggested Applications: Bolts on alternators, distributor clamps, carburetor adjustment screws, hairline or porosity cracks
Directions:
- Clean and dry parts using Permatex® Surface Prep™ activator.
- Assemble parts and make adjustments.
- Apply Threadlocker where thread enters parts. Refer to Technical Data Sheet for complete information.
NOTE: Threadlocker works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured Threadlocker by heating above 500°F (260°C); then use hand tools to separate components.
Terms and Conditions.
|
||
contact us, All Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
||
Returns are easy, simply contact usAll Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Ordering products from Inflatable Boats Sales we may receive a commission from our affiliates. |
Penetrating Grade Threadlocker GREEN Tube - 36ml
OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2″ (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
Applications:
- Automobile - Suggested Applications: Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, and hairline cracks.
- Marine - Suggested Applications: Bolts on alternators, distributor clamps, carburetor adjustment screws, hairline or porosity cracks
Directions:
- Clean and dry parts using Permatex® Surface Prep™ activator.
- Assemble parts and make adjustments.
- Apply Threadlocker where thread enters parts. Refer to Technical Data Sheet for complete information.
NOTE: Threadlocker works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured Threadlocker by heating above 500°F (260°C); then use hand tools to separate components.
Terms and Conditions.
|
||
contact us, All Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
||
Returns are easy, simply contact usAll Sales are final, please read our terms and conditions as we always guarantee 100% satisfaction. |
Ordering products from Inflatable Boats Sales we may receive a commission from our affiliates. |